高超声速飞行器新息滤波交互式多模型跟踪算法

研究临近空间高超声速飞行器在运动特点,针对强杂波环境下高速、高机动目标跟踪问题,提出用新息滤波减小观测噪声以修正模型概率更新过程的算法。Monte-Carlo仿真结果表明:该算法可以有效减小量测噪声对系统滤波的影响,提高滤波精度,在临近空间强杂波环境下具有较好的跟踪精度,具有一定工程实用价值。     

基于能量度量的星载AIS信号自适应码元同步抽取算法

基带信号码元同步抽取是目前星载AIS(Automatic Identification System)信号处理中的一个难点问题,针对过零检测和迟门早门等现有算法存在的不足,提出了基于能量度量的基带信号自适应码元同步抽取算法。将基带信号根据采样率和码速率的比值分割成相同的段的组合,之后分别计算每个段内相应样点的能量度量,最后选择使能量度量最大时的样点集作为最优同步抽取样点,该样点集具有最大信噪比。仿真结果验证了该算法误码率优于过零检测和迟门早门算法。     

基于中位秩的动态可靠性增长模型

给出了一种动态可靠性增长模型。首先利用统计中的中位秩法结合试验数据确定各个增长阶段的失效率 ,这一技术可以很好地解决小子样问题 ,并且由于利用了动态建模的思想 ,因而可以客观地反映系统的实际状态。其次 ,该模型继承了传统Duane模型简单、直观、易于进行参数估计的优点 ,同时又很好地处理了传统Duane模型所不适用的分阶段、多场景试验的情形 ,因而有很广阔的工程应用前景。最后通过仿真实例验证了该模型的正确性     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Warranty costs: An age‐dependent failure/repair model

An age‐dependent repair model is proposed. The notion of the “calendar age” of the product and the degree of repair are used to define the virtual age of the product. The virtual failure rate function and the virtual hazard function related to the lifetime of the product are discussed. Under a nonhomogeneous Poisson process scenario the expected warranty costs for repairable products associated with linear pro‐rata, nonrenewing free replacement and renewing free replacement warranties are evaluated. Illustration of the results is given by numerical and graphical examples. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

速率偏频激光陀螺寻北仪中转台测角周期性误差的影响分析

连续旋转式寻北仪以其突出的性能成为当前寻北仪研究的热点,但关于转台误差对连续旋转寻北算法精度影响的分析很少.针对速率偏频激光陀螺寻北仪,研究了转台测角周期性误差对寻北结果的影响.理论分析表明,测角周期性误差的存在会导致寻北结果偏离真实值,必须对其进行建模和补偿以提高寻北精度.对理论分析结果进行了仿真实验和样机寻北实验验...     

面向任务的导弹测试性需求分析与指标确定

针对当前缺乏科学合理的理论和方法确定导弹系统级测试性指标的现状,提出一种面向任务需求的测试性指标确定方法.将导弹任务剖面划分为贮存、出库、部署和发射四个阶段,并提出各个阶段相应的测试需求;分别建立基于贮存可用度、战斗准备任务成功率、部署战备完好率和发射任务成功率为性能要求的测试性需求子模型,给出各个性能指标与测试性参数...